Large-volume feeders, fast firing decks and pulsed air circulation

A. Hässler Anlagenbau GmbH | B5, 124

Large-volume feeders, fast firing decks and pulsed
air circulation

Hässler

» A large-volume feeder with a capacity of 2 000 m³

Hässler

A. Hässler Anlagenbau is a plant engineering company founded over 50 years ago by Andreas and Gerda Hässler and is owned fully by the founding family.

Initially, engineering focussed on building complete tunnel kilns. At the company site in Erbach mainly kiln components are manufactured now. At the Taucha site, above all large-volume feeders with a filling volume up to 3000 m³ are built. At the trade fair stand, alongside proven products like the large-volume feeders and super lightweight decks for fast firing, innovative developments like pulsed air circulation will be presented.

Issue 03/2010

Silo feeder with 2 000 m³ filling volume is operating successfully in Samara, Russia

For more than 100 years the silo feeder has proved itself as a dosing machine in the brick and tile industry. The plant construction company A. Hässler Anlagenbau has brought this reliable machine...

Issue 01/2024

Internal atmosphere circulation in the tunnel kiln for energy saving in the brick firing process

1 Introduction The total carbon dioxide emission from the German brick industry is about 1,73 million tons per year [1]. Approximately 56 % of the total emission is due to the combustion of natural...

Issue 7/2015

Cleia: Firing process and energy savings expert

Thanks to its latest successful projects and developments in energy management and firing processes, Cleia can now claim a leading position in the engineering of process solutions i.e. energy...

Issue 4/2015 M.Sc. Tino Redemann1, Prof. Dr.-Ing. Eckehard Specht1, Dipl.-Ing. Eckhard Rimpel2

Limitations of the use of circulation systems and their influence on the temperature and velocity profile in tunnel kilns

1 Introduction The use of circulation systems in tunnel kilns in the ceramics industry is state of the art. Suitable hot gas fans are commercially available up to 900°?C. With regard to the type of...

Issue 4/2011

Good experience with new-generation feeders (Eur. Pat.)

Even after more than a dozen years in service, the first few machines are still showing hardly any wear on their floor chains, despite the heavy forces acting on them. Just how long the floor chains...

ZI 2/2018